RollSeal,
Inc.
1751 County Road 68
P.O. Box 140, Bremen, AL 35033
1-888-RollSeal (1-888-765-5732)
256-287-7000 Fax: 256-287-7010
MEGA-COOL
Evaporative Cooling Systems
Manufactured by RollSeal Automated Systems - The Industry Leader in Evaporative Cooling.
Mega-Cool systems are constructed of several components. These are: reservoir, fill line, pump kit, supply line, spray line, and pads.
The Reservoir serves a dual purpose. It holds the water supply for the pump, and collects the water returning from the pads. It consists of eight inch (20.3 cm) PVC piping.The Fill Line supplies make up water to the system.
The Pump Kit includes the pump, shutoff valves, blood off line, and strainer. This section provides the force for moving water from the reservoir to the supply line.
The Supply Line carries water from the pump kit to the spray line. This section is made of 1-1/2 inch (3.8 cm) PVC piping and various fittings.
The Spray Line is constructed of 1-1/4 inch (3.2 cm) PVC pipe with holes drilled in the line along the top. These holes are drilled a certain distance apart, depending on the size of pad. When water is pumped to the spray line, water shoots out the holes onto the distribution plate, then drops into the pads.
The Pads are constructed of cellulose fibers formed into corrugated blocks. When water flows down the system, and air is drawn through the pads, the air evaporates some of the water, causing the ambient air to become much cooler. When the water reaches the bottom of the pads, it drips back into the reservoir.
Mount Options
Direct Mound System
Steel Bracket Eliminates Need for Wood.
Off-the-Wall Kit
Features
• 50/60 Hz Operation
• Self priming pump
• On the wall or off the wall systems
• Mounts to any building
• No additional wood required
